top of page

QUALITY POLICY

Unified Manufacturing, Inc. is committed to consistent provision of quality
products and services and on time delivery that will exceed the demands and
expectations of customers with continuous improvement to the QMS,
compliance with customer, statutory, and regulatory requirements, providing
an open door policy, and a healthy and safe work environment for personnel.

PO QUALITY CLAUSES

------   POQC Rev NC 1/28/22   ------


THE APPLICABLE QUALITY REQUIREMENTS DESCRIBED BELOW ARE REQUIREMENTS IF LISTED ON OUR PURCHASE ORDER.

QA1

All products ordered under this PO must meet the applicable drawings, specifications, standards, and purchase order requirements. Supplier shall subject all products to inspection and test to ensure product meets the entire above requirement.​

QA2

The supplier shall as a minimum maintain a quality management system that complies with ISO 9001 standard, based on the type of product and industry standard. Third-party certification to ISO 9001 or AS9100 standards is a plus.

QA3

The Supplier shall ensure that all personnel assigned to perform the services required for the product(s) ordered on this PO, are capable, skilled, qualified, and competent.

QA4

If any non-conformance is found after the shipment of the product, the supplier shall notify UMI within 24 hours of discovery.

QA5

The supplier must receive authorization from Quality before shipping non-conforming product to UMI.

QA6

The supplier shall notify UMI of any changes in product and/or process definition, and obtain prior approval before shipping the product.

QA7

UMI shall have the right of entry to it's supplier and their sub-tier facilities involved in this order and to verify all applicable documents. The same right is extended to our customers and the regulatory agency representatives.

QA8

The supplier shall flow-down to sub-tier suppliers the applicable requirements in the purchasing document; including key characteristics where required. The supplier shall flow-down to internal personnel their contribution to product or service conformity, their contribution to product safety, and the importance of ethical behavior.

QA9

The supplier shall ensure tools and equipment used for final product acceptance of the product are calibrated to NIST standards.

QA10

The supplier shall retain quality records for a minimum of 10 years. Records shall be made available to UMI or its customers for review upon request. After retention expires, supplier shall return or destroy records.

QA11

The supplier shall ensure that Foreign Object Debris (FOD) if any, is removed before packaging. When applicable, this requirement is flowed down to sub-tier suppliers.

QA12

The supplier shall maintain a counterfeit prevention program.

QA13

The supplier shall protect parts from physical damage throughout the entire time of the work transfer. Parts shall be packaged individually to prevent part-to-part contact and packaged to protect during transportation.

Quality: FAQ
bottom of page